GE VG2052, User Manual

Page: 53 / 64

51
APPENDIX: REFERENCE
How to Find Your TV’s Video
Input Channel
You need to tune your TV to the Video Input Channel if you are
using the VCR’s AUDIO/VIDEO OUT jacks to connect to the TV’ s
AUDIO/VIDEO INPUT jacks. Y ou must select this “channel” befor e
you can see the VCR’ s menus, the cable or antenna r eception,
and the content that’s on a tape.
The video channel on TVs varies for dif ferent brands and
different models. Below ar e some steps to tr y:
• If your TV brand is GE, RCA, or PROSCAN, press the TV
button on the remote control that came with the VCR. Then
press the INPUT button on the remote.
• If you have another brand of TV, consult the section, VCR
Basics, to see if the VCR’s remote control can be set to
control your TV. If so, follow the step above.
If those options do not work, try the following ideas. You might
access the V ideo Input Channel by:
• pressing a button on the remote (see table below)
• selecting the channel from the TV’s menu system
(see table below)
• tuning directly to the channel by selecting a specific channel
number (see table below)
• going through all the channels in the channel list by
pressing the channel up or down buttons on the TV.
Some common scenarios ar e listed in the Video Input Channel
Variations table that follows:
Video Input Channel Variations
Button/Switch Button on the Channel
on the TV TV Remote Number
VIDEO VID 1 00
SIGNAL LINE 90
VID 1 VID 91
VID 2 VIDEO 92
S-VID S-VID 93
S-VIDEO INPUT VID 1
S-VIDEO VID 2
SOURCE
AUX
NISH SPECIFICATION
INPUT
TV
•VCR
REVERSE PLAY FORWARD
RECORD
STOP PAUSE
INFO SEARCH
MUTE GO BACK
1 2 3
4 5 6
7 8 9
0
F.ADV
CLEAR MENU SPEED
CHAN
V
O
L
V
O
L
CHAN
TV VCR
TRACKING
ON OFF
TV
Button
INPUT
Button