background image

Cautions

SAFETY INFORMATION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock or
personal injury.

This symbol indicates
important instructions
accompanying the product.

WARNING

To reduce risk of fire or
shock hazard, do not
expose this product to
rain or moisture.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution: 

To reduce the risk of electric shock, match the wide blade of plug to wide

slot, and fully insert.

Attention:

 Pour éviter les chocs électriques, introduire la lame la plus large de la

fiche dans la borne correspondante de la prise et pousser jusqú au fond.

Refer to the identification/rating label located on the back panel of your product
for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.

Cable TV Installer:

 This reminder is provided to call your attention to Article

820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code,
Part 1) which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building
as close to the point of cable entry as practical.

Care and Cleaning:

Use a soft cloth or the dusting attachment of your vacuum cleaner to dust
your

 

VCR. Remove dust from the ventilation holes.

Plastic surfaces are easily scratched and can be marred by alcohol and
various solvents. Avoid excessive use of oil-based furniture polishes since
the materials used in the cabinet will accumulate more dust. A
nonabrasive, antistatic cleaner/polisher is recommended.

Product Registration

Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the product.

Model No.

_________________________________________________

Serial No.

_________________________________________________

Purchase Date: _________________________________________________

Dealer/Address/Phone: ___________________________________________________________________________________________________

___________________________________________________________________________________________________

VG2052

Summary of Contents for VG2052

































































Reviews: