background image

System maintenance

Venue 50 – Basic Service Manual

10-15

5447566-100 English Rev. 7

Probe maintenance

Probe related checks

Basic probe care

The Ultrasound system user manuals and various probe 
handling cards provide a complete description of probe care, 
maintenance, cleaning and disinfection. Ensure that you are 
completely familiar with the proper care of GE probes.

Ultrasound probes can be easily damaged by improper 
handling. See the User Manual and probe care cards for more 
details. Failure to follow these precautions can result in serious 
injury and equipment damage. Failure to properly handle or 
maintain a probe may also void its warranty.

Any evidence of wear indicates the probe cannot be used.

Do a visual check of the probe pins and Ultrasound system 
sockets before plugging in a probe.

The Interoperative probes often have special considerations and 
individual probe user manuals. For Interoperative probes also 
refer to their separate user manuals.

Table 10-10:  System preliminary checks

Step

Item

Description

1. 

Probe Holder

Clean probe holders. (they may need to be soaked to remove excess gel).

2. 

Probes

Thoroughly check the Ultrasound system probe connectors and remove 
dust from inside the connector sockets if necessary. Visually check for 
bent, damaged or missing pins.
Verify that the Ultrasound system properly recognizes all probes.

Summary of Contents for Venue 50


































































































































































































































































































Reviews: