49-1000640 Rev. 3
CARE AND
CLEANING
Cleaning the Outside
The stainless steel door and door handle can be cleaned
with a commercially available stainless steel cleaner.
Cleaners with oxalic acid such as Bar Keepers Friend
Soft Cleanser™ will remove surface rust, tarnish and
small blemishes.
8VHRQO\DOLTXLGFOHDQVHUIUHHRIJULWDQGUXELQWKH
GLUHFWLRQRIWKHEUXVKOLQHVZLWKDGDPSVRIWVSRQJH'R
not use appliance wax or polish on the stainless steel.
Cleaning the Condenser
The condenser has fins and tubes that can become
clogged with dirt and lint.
To clean:
1.
8QSOXJWKHLFHPDNHU
2.
Remove the kickplate by removing the 2 screws in
the sides of the metal grill, then 2 additional screws
from the front of the kickplate. Pull kickplate forward to
remove. To access top of condenser, remove door by
removing the hinges from the cabinet. Open the water
filter access door and remove 2 screws in the filter
cover. Remove hinge cover plate on opposite side of
hinge by firmly pressing in and sliding down. Pull filter
cover forward to remove.
3.
Vacuum the surface to remove all dust and lint.
NOTICE
Do not dent the fins.
4.
Re-install the filter cover, hinge cover plate, kick plate
and door.
Care And Cleaning
Screws
1
2
WARNING
Electrical Shock Hazard
To eliminate the risk of electric shock or injury, you
must first unplug the icemaker before proceeding.
Failure to follow these instructions can result in
electrical shock or injury.
Summary of Contents for UCC15NPRII
Page 90: ...30 49 1000640 Rev 3 Notes...
Page 91: ...49 1000640 Rev 3 31 NOtes...
