GE Transport Pro, Service Manual

Page: 56 / 110

6-10 Transport Pro Revision A
2012659-042
Troubleshooting: Service Menu
6. To clear the error logs, rotate and press the TRIM KNOB control to
select either of the following:
‹
CLEAR OUTPUT ERRORS — Clears the stored output run time
error logs.
‹
(TRAM only) CLEAR INPUT ERRORS — Clears the stored
input run time error logs.
Battery Service
The Battery Service menu provides you with non real-time information
about the monitor’s internal batteries. It does not provide information
about connected TRAM batteries.
1. Select MORE MENUS > MONITOR SETUP .
2. Select SERVICE MODE and enter the password.
3. Select BATTERY SERVICE .
NOTE
If there is only one internal battery, no information will display
in the Battery B column.
ERROR NUMBER A sequential number used to identify each event or
problem.
INPUT ERROR Additional information used to determine the cause of
the error.
Parameter Description
622A