MA-014 - TRANSFIX DGA 500 User Guide – Rev 1.1
13-Oct-15
Page 5 of 28
2
SAFETY
2.1
Symbols
The following symbols are used in this manual and/or on this product:
General Warning or Caution. Refer to the Installation Manual / User
Guide to prevent injury or damage to equipment.
Electrical Hazard. Risk of electric shock.
Primary Protective Earth connection.
Hot surfaces may be present.
2.2
Warnings
The following warnings must be observed:
The minimum ambient temperature for installation and service activities is
−10 °C.
If the equipment is installed or used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
If working at height, third parties must have received appropriate training for
working at height prior to work commencing. This includes, but is not limited to
"Working at height training".
If working at a height greater than 4 feet or at a height greater than that
stipulated by national or site regulatory requirements, it is the responsibility of
the user to ensure that planned work complies with those requirements.
The user shall also ensure that any third-party equipment, such as an approved
platform, scaffold or lift is suitable and safe before commencing work.
Ladders
or improvised platforms do not meet GE service engineer requirements
.
