24
Installation Instructions
6.1 Rehang the fresh food door
6.1.1
Lower the fresh food door onto the
bottom hinge pin.
Be sure the washer
is in place on the pin.
REHANGING THE DOORS
6
6.1.2
Insert the pin on the center hinge into the
socket in the top of the door. Place the spacer,
then the washer, on the hinge pin.
NOTE:
The center hinge must be turned over
as shown when mounted on the left side.
6.1.3
Tilt the door toward the cabinet. As the door is
brought into position, slide the hinge under the
head of the screw which earlier had been partly
driven into the outermost hole. Insert the
remaining screw, then tighten both screws
securely.
Hinge
Bracket
Plastic
Washer
Plastic Washer
and Spacer
Hinge Pin
6.2 Rehang the freezer door
6.2.1
Lower the freezer door onto the center
hinge pin.
Be sure the washer and
spacer are in place on the pin.
REHANGING THE DOORS
(CONT.)
6
Center Hinge Pin
Plastic Washer
and Spacer
6.2.2
Tilt the door toward the cabinet, lifting the top
hinge so the pin fits into the socket on the top
of the door.
6.2.3.
Make sure the door is slightly above the top of
the cabinet and the gap between the doors is
even across the front. Tighten the top hinge
screws. Do not overtighten these screws–tighten
them until they are just snug, then turn them
another one-half turn.
REVERSING THE DOOR SWING
(CONT.)
2
Plastic
Washer
Hinge
Bracket
Models with a hinge bracket
that has 2 screw holes.
Models with a hinge bracket
that has 4 screw holes.
