background image

Care and cleaning of the refrigerator.

12

Cleaning the Outside

The door handles and trim

(on some

models). Clean with a cloth dampened
with soapy water. Dry with a soft cloth. 

Keep the outside clean. 

Wipe with a clean

cloth lightly dampened with kitchen
appliance wax or mild liquid dish
detergent. Dry and polish with a clean, 
soft cloth. 

The stainless steel panels and door handles

(on some models) can be cleaned with 
a commercially available stainless steel
cleaner. Do not use appliance wax or
polish on the stainless steel.

Do not wipe the refrigerator with a soiled dish
cloth or wet towel. These may leave a residue
that can erode the paint. Do not use scouring
pads, powdered cleaners, bleach or cleaners
containing bleach because these products can
scratch and weaken the paint finish.

Cleaning the Inside

To help prevent odors,

leave an open box

of baking soda in the fresh food and
freezer compartments.

Unplug the refrigerator before cleaning.

If this is not practical, wring excess
moisture out of sponge or cloth when
cleaning around switches, lights or
controls. 

Use warm water and baking soda solution–
about a tablespoon (15 ml) of baking soda
to a quart (1 liter) of water. This both
cleans and neutralizes odors. Rinse and
wipe dry.

After cleaning the door gaskets, apply a
thin layer of petroleum jelly to the door
gaskets at the hinge side. This helps keep
the gaskets from sticking and bending
out of shape. 

Avoid cleaning cold glass shelves (on some
models) with hot water because the extreme
temperature difference may cause them to 
break. Handle glass shelves carefully. Bumping
tempered glass can cause it to shatter.

Éviter de nettoyer les tablettes en verre froides
(sur certains modèles) à l’eau chaude parce que
l’écart de température extrême risque de les
craquer. Manipuler les tablettes en verre avec
précaution. Le verre trempé soumis à un choc
risque de se fracasser.

Do not wash any plastic refrigerator parts in 
the dishwasher.

Condenser

There is no need for routine condenser
cleaning in normal home operating
environments. However, in environments
that may be particularly dusty or greasy,
the condenser should be cleaned
periodically for efficient refrigerator
operation.

To clean the condenser, turn the
temperature control dial to 

0

. Sweep

away or vacuum up dust. 

For best results, use a brush specially
designed for this purpose. It is available
at most appliance parts stores. 

Cleaning the condenser coils.

Consumer Support

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Summary of Contents for TOP-FREEZER 16

































Reviews: