GE TLE Scalable 40, User Manual, Page: 83 / 118

TruVision DVR 40 User Manual 77
c. Under Alarm Schedule select the schedule for when the TVR 40 will respond to an external
alarm.
Select the day of the week and then for Period 1 enter the start and end time periods for the
selected day. Each day can have up to four time periods.
Note: The time format is 24-hour.
d. Select how the alarm should be indicated. Enable or disable each option by pressing Enter or
left-clicking the mouse.
Alarm Out

When enabled, the Alarm Out is activated. Up to four alarm outputs can be enabled.
Buzzer  An audible alarm sounds.
TCP

The alarm information is sent to the remote IP (see section “Network settings ” on
page 67 .
Full Screen

On Alarm channel will be displayed in full screen.
Email

The alarm information is sent to an Email address (see section “E-mail settings” on
page 68.
e. Select OK and press the joystick for Enter to return to the Alarms menu, or select Cancel to
abort and return to the Alarms menu.
5. To set a PTZ link to the alarm
a. In the Alarms menu go to the Link PTZ setup button and press Enter or left-click the mouse.
The Link PTZ submenu appears.
b. Go to the Camera list box and select the camera for which you want to set the PTZ link when
there is an alarm.
c. Select one of the PTZ options listed by pressing Enter or left-clicking the mouse to enable (

)
or to disable: Preset, Preset Tour, or Shadow Tour. When Preset or Preset Tour is enabled,
enter its pre-programmed number. See “PTZ settings
” on page 81 for further information.