GE TLE Scalable 40, User Manual, Page: 77 / 118

TruVision DVR 40 User Manual 71
7. Go to the Remote Host Port edit box and press the joystick, or left-click the mouse. Using the
numeric buttons on the front panel, or the on-screen numeric keypad if using the mouse, enter
the remote host port value. If using the front panel, press the joystick for Enter.
8. Go to the NTP check box and press the joystick, or left-click the mouse to enable (

) or to disable
the option.
9. Go to the Time Zone edit boxes and set the time zone in which the TVR 40 is located.
10. Go to the Interval edit box and enter the number of hours after which the TVR 40 should
synchronize its time with that of the network server.
11. Go to the NTP Host check box and press the joystick, or left-click the mouse. Enter the NTP server
address. The default address is europe.pool.ntp.org .
Note: For the NTP to work, the DNS IP address needs to be setup correctly.
12. When all the changes have been done, select OK to confirm the changes and return to the
Network menu.
13. When you have made all the changes required in the Network menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu.
PPPoE dial-up settings
Use this setting if using a direct connection to an ADSL.
To setup a PPPoE dial-up setting
1. In the Network menu go to the PPPoE setup box and press the joystick for Enter, or left-click the
mouse. The PPPoE submenu appears.
2. Go to the PPPoE check box and press the joystick, or left-click the mouse, to enable (

) or disable
the option.
3. Go to the User Name edit box and press the joystick for Enter. Using the on-screen alphanumeric
keyboard, enter the user name provided by your ISP.
Note : Press the Shift key in the on-screen alphanumeric keyboard to change the type of character
(uppercase, lowercase, symbol, number). Alphanumeric information can only be entered using the mouse.
4. Select Password and press the joystick for Enter, or left-click the mouse. Using the on-screen
alphanumeric keyboard, enter the password provided by the ISP.
5. Select Confirm and press the joystick for Enter, or left-click the mouse. Using the on-screen
alphanumeric keyboard, re-enter the password.
6. When all the changes have been done, select OK to return to the Network menu.