1997 REFRIGERATORS
GLOBAL NEW GENERATION
SxS
© General Electric Company 1997
8
Rollers
Rollers at the base of the cabinet enable the consumer to easily move the refrigerator. The front rollers
are adjustable to permit leveling the cabinet. The adjustment screws, located behind the base grille,
have 3/8-inch hex-heads that are also slotted (for use of a large blade screwdriver). The rear rollers are
not adjustable.
To remove a front roller assembly from the base of the cabinet, tilt the cabinet and place 3-inch blocks
under the side of the outer case. Remove the three 1/4-inch hex-head screws to dismount the bracket.
Then, loosen the adjustment screw to disengage the nut and withdraw the roller assembly from the
cabinet.
Remove the E-Ring to disassemble the adjustment
screw from the base channel. Upon reinstallation of
the roller assembly, to facilitate installing the
adjustment screw, position the nut so that the flared
thread is toward the rear.
