background image

Contr

ols Setting Guide

Save and refer to Garment Manufacturer’s Care Labels

For more information on care labeling, send for “What’s New About CARE LABELS.”
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.

DO NOT tumble dry jackets or pillows containing Kapok. Fire hazard may result.
NOTE: 
The Cycle Selector settings indicated here are to be used as a guide. You may find that best results 
are obtained for some of your fabrics by setting the Cycle Selector to either side of the recommended settings.

11

Up to 20

Plastic-lined pants, bibs, pads, crib sheets may be washed with regular load but should be dried separately.

45 –60

Rinse at once, soak in diaper pail with solution of cold water and borax (1

1

4

teaspoons to gallon). Soak before

washing with a presoak product. Use warm water.

25 –40

Midpoint

Pretreat heavily soiled areas; brush on a little liquid detergent, or wet area and rub in detergent. Use Warm
Soak for oil and juice stains. Use Cold Soak for egg, milk and cereal stains.

Follow Label Directions

85 –95

Shake out excess dust. Remove stains. Pretreat heavily soiled areas with detergent. Wash one large or two

65 –95

small blankets at a time.

40

See “Washable Woolens” instructions below.

Full loads 65 –75

Small loads 35 –45

25 –35

30

If badly sun-weakened, even hand washing will cause tearing. Be sure colors are fast and fabric is washable.

Less Dry

Remove hooks and non-washable trim. Use Warm Soak if heavily soiled.

20 –30

30 –40

Frequent washing lengthens life, helps retain shape. Remove non-washable trim. Close zippers; fasten hooks.

Do not wash or dry glass fiber in the Spacemaker Laundry.

Less Dry

If badly sun-weakened, even hand washing will cause tearing. Be sure colors are fast and fabric is washable.

Midpoint

Remove hooks and non-washable trim. Use Warm Soak if heavily soiled.

Midpoint

More Dry

Turn slacks and dark items inside out to prevent whitening of seams and creases.

25 –35

20 –30

Midpoint

Use Warm Soak for pillowcases stained with hair oil.

Midpoint

Pretreat collars and cuffs with liquid laundry detergent.

More Dry

See “Work Clothes” instructions below.

15 –20

Some plastics will tear if machine washed. Place small items in mesh bag for washing. If shower curtains are
soap-streaked, add Calgon brand to wash water; don’t use detergent.

Follow Label Directions

Follow Label Directions

40 –55

Pretreat around neckline. Follow manufacturer’s recommendations.

30 –40

30 –40

As a general rule, if wool can be hand washed, it can be “washed” by soaking in the washer. A liquid detergent is 
preferred because it dissolves faster in soak than a granulated detergent. Pretreat woolens with liquid detergent. Never 
use chlorine bleach.

65 –85

Pretreat heavily soiled areas by rubbing in liquid laundry detergent. Let stand 30 to 60 minutes. If clothes are heavily 
soiled, use Warm Soak for greasy and oily soil. Cold Soak for flour, dust, blood-stained garments. Use 1/4 to 1/2 cup 
liquid laundry detergent in SOAK; 1/2 to 1 cup in Wash.

Dry Cycle
Setting

Special Instructions

Summary of Contents for Spacemaker WSM2700

























Reviews: