GE Spacemaker GSM1800J, Technical Service Manual

Page: 26 / 45

– 26 –
9. Pull the motor mount back far enough to clear
the motor tab, work the motor from the
attaching hoses, and remove the motor pump
assembly from the dishwasher.
10. Reverse the above procedure to install.
Pull Out
Pull Out
Motor Tab
Motor Mount
Sump Assembly
The sump assembly consists of the filter
assembly, micro-filter, sump clamping nut, sump
gasket, and sump. The filter assembly prevents
large particles from reaching the micro-filter and
the micro-filter prevents small particles from
reaching the sump. The filter assembly rests
above the sump and the micro-filter sits above the
sump basin. The clamping nut holds the sump
gasket and sump to the bottom of the dishwasher.
The filter assembly, micro-filter, and sump
clamping nut are accessed from inside the
dishwasher. The gasket and sump are located
under the tub in front of the motor pump assembly.
Removal and Replacement
1. Disconnect power.
2. Carefully pull the dishwasher out far enough
from its installation to access the sump
assembly from the right-hand side of the
dishwasher.
3. Remove the high-pressure switch hose from
the sump.
Pressure
Switch Hose Sump
Motor Pump
Assembly
Lock Nut
As seen from right side
of dishwasher.