background image

HELP US HELP YOU…

Read this book carefully.

It is intended to help you 
operate and maintain your 
new dryer properly.

Keep it handy for answers to 
your questions.

If you don’t understand something
or need more help, call: 

GE Answer Center

®

800.626.2000
24 hours a day, 7 days a week.

Save time and money.

Before you request service…
check the Problem Solver 
section. It lists causes of minor
operating problems that you can
correct yourself.

If you received a 
damaged dryer…

Immediately contact the dealer (or
builder) that sold you the dryer.

Write down the model
and serial numbers.

You’ll find them on a label on the
front of the dryer behind the door.

These numbers are also on the
Consumer Product Ownership
Registration Card that came 
with your dryer. Before sending 
in this card, please write these
numbers here:

Model Number

Serial Number

Use these numbers in any
correspondence or service 
calls concerning your dryer.

—Do not store or use gasoline or other 

flammable vapors and liquids in the 
vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; 

do not use any phone in your building.

• Clear the room, building or area of 

all occupants.

• Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier’s
instructions.

• If you cannot reach your gas supplier, 

call the fire department.

—Installation and service must be performed 

by a qualified installer, service agency or 
the gas supplier.

WARNING: For your safety the information in this manual must be followed to minimize 
the risk of fire or explosion or to prevent property damage, personal injury or loss of life.

If you need service

To obtain service, see the Consumer Services page 
in the back of this book.

We’re proud of our service and want you to be
pleased. If for some reason you are not happy with the
service you receive, here are three steps to follow for
further help.

FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In most
cases, this will solve the problem.

NEXT, if you are still not pleased, write all the
details—including your phone number—to:

Manager, Consumer Relations
GE Appliances, Appliance Park
Louisville, KY 40225

FINALLY, if your problem is still not resolved, write:

Major Appliance Consumer Action Panel
20 North Wacker Drive
Chicago, IL 60606

2

All drying instruction terms in this book conform to the Care 
Labeling Rule established by the Federal Trade Commission, January 1984.

Summary of Contents for Spacemaker DSKP233ET

















Reviews: