background image

 US 

 YOU...

Read this book 

It is intended to help you
operate and maintain your
new dryer properly.

Keep it handy for answers to
your questions.

If you don’t understand something
or need more help, call:

GE Answer 
800.626.2000

24 

hours a day, 7 days a week.

Save time and money.

Before you request service..,
check the Problem Solver
section. It lists causes of minor
operating problems that you can
correct yourself.

 you received a

damaged dryer...

Immediately contact the dealer (or
builder) that sold 

 the 

Write down the model
and serial numbers.

You’ll find them on a label on the
front of the dryer behind the door.

These numbers are also on the
Consumer Product Ownership
Registration Card that came
with your dryer. Before sending
in this card, please write these
numbers here:

Model Number

 Number

Use these numbers in any
correspondence or service
calls concerning your dryer.

 For your safety the information in this manual must be 

 to minimize

the risk of fire or 

 or to prevent property damage, personal injury or loss of 

—Do not store or use 

 or other

flammable vapors and 

 in the

vicinity of this or any other 

 TO DO   YOU 

 GAS

 Do not try to light any 

● 

Do not touch any electrical switch;

do not use any phone in your 

 Clear the room, 

 or area of

 

● 

 

 your gas 

 from a

neighbor’s phone. 

 the 

 supplier’s

instructions.

   you 

 reach your gas 

 the 

 department.

 and service must be performed

by a 

 

 service agency or

the gas 

All drying instruction terms in this book conform to the Care
Labeling-Rule established by the 

 Trade Commission, January 1984.

If you need service

To obtain service, see the Consumer Services page
in the back of this book.

We’re proud of our service and want you to be
pleased. If for some reason you are not happy with the
service you receive, here are three steps to follow for
further help.

 contact the people who serviced your

appliance. Explain why you are not pleased. In most
cases, this will solve the problem.

NEXT, if you are still not pleased, write all the
details—including your phone number—to:

Manager, Consumer Relations
GE Appliances, Appliance Park
Louisville, KY 40225

 if your problem is still not resolved, write:

Major Appliance Consumer Action Panel

20 North 

 Drive

Chicago, 

 60606

Summary of Contents for Spacemaker DDP1400S

















Reviews: