background image

Service Service 

Max. 

Average

Average

Model

Flow rate

Life

Pressure 

Temp.

Contaminant

% Reduction

Influent

Effluent

GXITD

0.5 gpm

2000 gal. (7571 liters)

25–125 psi

100°F.

Chlorine

93%

2.0 mg/L 0.1 mg/L:

(1.9 lpm)

or 6 months

(172–862 kPa)

(38°C.)

GE SmartWater

™ 

GE Model GXITD Filter 

Do not use with water that is microbiologically unsafe or with water 

of unknown quality without adequate disinfection before or after

the system.
Small parts remaining after the installation could be a choke

hazard. Discard safely.

System Tested and Certified by NSF International against

ANSI/NSF Standard 42 for the reduction of Taste and Odor, 

and Chlorine, Class I.

WARNING

INSTALLATION PRECAUTIONS

REQUIRED TOOLS FOR INSTALLATION

a tube cutter

• 

7/16

″, 

1/2

″ 

and 9/16

″ 

wrenches

• 

a knife

• 

a bucket or pan

OPTIONAL TOOLS FOR INSTALLATION

a file

sandpaper

CAUTION:

Using pliers or vise grips 

WILL

damage the fittings.

Your new GE icemaker water filter comes complete with all the necessary hardware for installation. Each filter gives you up to six

months of great-tasting water. Filter should be changed after 6 months of use. 

SPECIFICATIONS

Testing parameters: Influent Challenges = pH 7.5 ± 0.5; Temperature 68°F ± 5°F (20°C ± 3°C); Pressure 60 psig; Flow Rate = 1gpm

If slow water or hollow ice occurs, replace filter.

Part No. 251B6017P003-1   

(11-00 JR) 

Pub. No. 49-50047-1

www.GEAppliances.com

GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225

LIMITED 60 DAY WARRANTY

What does this warranty cover?

— Any defect in materials or workmanship in the manufactured product.

What does this warranty not cover?

— Customer installation. The Installation Instructions cover installation

and replacement instructions.

— Defects that result from abuse, misuse, alterations, improper

installation or damage not caused by GE.

— Liability on the part of GE under this or any other warranty for any

indirect or consequential damage. 

— Products that are used for commercial or industrial applications.

For how long after the original purchase?

— Sixty (60) days.

How do I make a warranty claim?

— Return to the retailer from which it was purchased along with a copy 

of the “Proof of Purchase.”

How does state law relate to this warranty?

— This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state.

Contact us at www.GEAppliances.com, or call 800-GE-CARES (U.S.), or toll-free 
866-777-7627 (Canada).

Protect from freezing. Drain filter when room temperature drops

below 32°F. (0°C.).

Use the in-line water filtering system on a potable, safe-to-drink,

home COLD water supply only. The filter will not make unsafe

water safe to drink. Do NOT use on HOT water (100°F. max.).

Do not install on line pressure above 125 psi (862 kPa), or below 

25 psi (172 kPa).

All of the refrigerator installation requirements must be met when

installing the filter. 

Do not use wicking or pipe dope sealer for fitting connections 

into head of filter. Teflon® tape is recommended and included.

Teflon is a registered trademark of DuPont. 

Do not install in direct sunlight.

Installation must comply with existing state or local plumbing codes.

It is essential that operational, maintenance and filter replacement

requirements be carried out for this product to perform as

advertised. Change filter at least every six months. Flush new

cartridge for 5 minutes.

Reviews: