GE SmartWater GXCC01D, Use & Care Manual

Page: 15 / 20

15
Troubleshooting Tips
Water not hot enough
or cold enough
Dispenser is unplugged. • Push the plug completely into the outlet.
The fuse is blown/circuit breaker is
tripped.
• Replace house fuse or reset the house circuit breaker.
Problem Possible Causes What To Do
All the water in the water tank has
been used.
• Wait 30 minutes for water to heat or cool.
Temperature limiter tripped. • Set the cold and hot power switches to the 0 (off)
position. Wait five minutes, then set the switches to
the I (on) position. wait 30 minutes for water to heat
or cool.
Water dispenser
does not work
Empty water bottle. • Replace with a new water of bottle.
Mineral deposits clogging tanks. • See Care and Cleaning.
Water dispenser
leaks from the
outside
Crack or pinhole in bottle.
Water dispenser is
noisy
Water dispenser is uneven. • Make sure the water dispenser is installed on a level
floor or counter strong enough to support it when
fully loaded.
Bottle making a gurgling noise as
water fills the tanks.
• This is normal.
• Replace with a new water of bottle.
Technical Specifications of Your Water Dispenser
Inlet Tension or
Nominal Tension (Volt)
Operation Frequency or
Nominal Frequency (hertz)
Nominal Power (Watt) or
Nominal Current (Ampere)
115 V ~
4,7 A
60 Hz