Security Pro 7000
54
8. Press
B
. “PARTITION JUMP” or
“
PTN JP” appears:
Press
1
+
#
to turn the option
off
for this user code.
Press
2
+
#
to turn the option
on
for this user code.
9. Press
B
.
“
SYSTEM TESTS” or
“
TESTS” appears:
Press
1
+
#
to turn the option
off
for this user code.
Press
2
+
#
to turn the option
on
for this user code.
10. Press
B
. “LATCHKEY REPORT” or
“
LATCH” appears:
Press
1
+
#
to turn the option
off
for this user code.
Press
2
+
#
to turn the option
on
for this user code.
11. Press
*
+
B
to move to the next user code, or
*
+
00
+
#
to exit the programming menus.
Note
The system will not accept
the same code for two differ-
ent users.
¾
To erase a user code:
1. Enter the programming menus by pressing
9
+ System or Partition Master
CODE
.
2. Press
B
until the touchpad displays “USER CODES,” then press
#
.
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press
#
. (You can-
not delete the System Master code.)
4. Press
B
until the touchpad displays the user code you wish to erase, then press
#
. For exam-
ple, if you want to change User code 4, press
#
when the touchpad displays “USER 04” or
“REG CODE 04.”
5. Enter the System or Partition Master code you used in Step 1 and press
#
. The deleted code
appears as “USER 04 ****” or “RG 01 ––––,” for example.
6. Press
*
+
B
to move to the next user code, or
*
+
00
+
#
to exit the programming menus.
¾
To change or delete the Partition Master Code:
1. Enter the programming menus by pressing
9
+ System or Partition Master
CODE
.
2. Press
B
until the touchpad displays “USER CODES,” then press
#
.
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press
B
until the
display reads “PARTITION MASTER CODE” or “PTN MASTER,” then press
#
.
4. Enter the System Master Code to delete the existing Partition Master Code
OR enter a new 4 digit Partition Master Code to replace the existing code, then press
#
.
5. Press
*
+
00
+
#
to exit the programming menus.
¾
To change the Master Code:
1. Enter the programming menus by pressing
9
+ System Master
CODE
.
2. Press
B
until the touchpad displays “USER CODES,” then press
#
.
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press
B
until the
display reads “SYSTEM MASTER CODE” or “SYS MASTER,” then press
#
.
4. Replace the existing code with the new 4 digit System Master Code then press
#
.
5. Press
*
+
00
+
#
to exit the programming menus.