24940 manual 8/19/03 9:04 AM Page 9
CODE LIST
Programming For DVD
Most GE, RCA and ProScan DVD systems
will not require programming. Check to see
if your DVD system responds to the remote
before you begin programming.
1. Manually turn on the DVD system. Find
the three digit code for your DVD system at
the back of the instructions.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
LIGHT
CODE
SEARCH
INDICATOR
3. Press and release
ON•OFF
1
2
3
4
5
6
7
8
9
0
DVD
the DVD button (The
INDICATOR LIGHT
will blink then remain
(BLINK)
lit.
4. Enter the code
using the Number
Buttons. After your
code is entered, the
(OFF)
INDICATOR
LIGHT will turn off. If
the code is not valid,
the INDICATOR
LIGHT will blink.
Check the code list and
repeat process.
5. Aim the remote at your DVD system
and press the ON•OFF button. Your DVD
system should turn off.
6. If the DVD System responds, no further
programming is required.
NOTE:
If your DVD does not respond, try
all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method on Page 12.
7. Enter your code
here for easy
reference.
DVD CODE
8
