24940 manual 8/19/03 9:04 AM Page 5
CBL
AUDIO•AUX
Learning Function
The learning feature is used as a supplement to the stan
dard preprogrammed library. the standar code library
provides most of the functions needed,, but you can add
additional functions from your original remote. Note:
No functions may be stored under the LEARN, SLEEP,
CODESEARCH, MENU or any of the device buttons.
1. Place the remote control unit and the Original remote
control unit so that they
face each other. They
should not be any more
than 2 inches apart.
2. Press and hold the
CODE SEARCH
button
until the INDICATOR
LIGHT
lights, then
release the CODE SEARCH
CODE
button.
2 inches
SEARCH
3. Press and release the desired
Mode button (TV, VCR,
CABLE, SAT
, etc. . . .) The
INDICATOR LIGHT
will blink
off once button press is accept
ed.
4. Press and release the LEARN
button.
LIGHT
VCR
TV
(BLINK)
CD
INDICATOR
CBL/SAT
SAT
DVD
5. Press and release the valid
button to be learned on the
94940 remote in which you will
store a new function. The L1, L2,
LEARN
L3
or any other button (except,
LEARN, CODE SEARCH, MENU,
OR device buttons) can be used to
store learned functions.
L1
L2 L3
6. Press and hold the button on the
or other button
original remote control until INDI
CATOR LIGHT
on the 94940
remote blinks once. Once the
INDICATOR LIGHT
blinks you
BLINK
may continue with the next func
tion.
If there is error in learning the
new function the INDICATOR
LIGHT
will flash for 3 seconds but
remain in the learning mode.
CODE
Return to step 5 if the INDICA-
SEARCH
TOR LIGHT
flashed.
NOTE: Hold the function key on
your original remote for at least 3
seconds for the command to be successfully learned.
7. Repeat steps 5 and 6 to store more functions.
8. Once the selected functions are stored press the CODE
SEARCH button and the remote will return to original
operation mode.
4
