GE Responder 2000, Operator'S Manual

Page: 114 / 142

2026116-001 Revision B Responder™ 2000 Page 114
5. Inspect Cables/Connectors
a) Inspect for cracks, broken wires, or other signs of
damage.
Replace if cracked or damaged
b) Verify that connectors are engaged securely If this is not the case, please contact
Customer Service.
6. Inspect Indicators and Display:
a) Turn Machine on
(Green) Power button light illuminated If this is not the case, please contact
Customer Service.
(Red) Service LED stays illuminated
(Red) Service LED turns on Briefly Take the device out of use and call
Customer Service.
No Action
(Yellow) Charging button light illuminates If that’s not the case, please contact
Customer Service.
b) Verify AC Power, Service Required, and Battery
Charging LEDs turn on momentarily during power on.
If this is not the case, please contact
Customer Service.
c) During power on, verify a brief audible tone is output. If this is not the case, please contact
Customer Service.
d) Verify Charge button backlight is momentarily turned
on during power on.
If this is not the case, please contact
Customer Service.
e) Verify Shock button backlight is momentarily turned
on during power on.
If this is not the case, please contact
Customer Service.
f) Press Manual button. Verify Manual Mode is exited.
Press Manual button again and verify Manual Mode
is entered. If this is not the case, please contact
Customer Service.
g) Verify Power cable connected to Responder 2000 No Action
h) Verify AC Power LED is turned on. If this is not the case, please contact
Customer Service.
i) Verify Display is working correctly and no error
messages are indicated. If display is working incorrectly, take
the device out of use. Please
contact Customer Service.
j) Place battery in unit and connect AC power. A green
and a yellow LED shall be turned on the front panel,
indicating AC is connected and battery is charging. If this is not the case, please contact
Customer Service.
k) Turn Machine off No Action