GPS Grandmaster Clock
20
RT430-TM-EN-5
It is also possible to obtain equipment with one or two power supply sources option, the second used for
redundancy. Each power supply source can have the configuration shown in the table below:
TABLE 2: Possible configuration of the power supply source.
POWER SUPPLY 1
POWER SUPPLY 2
Not applicable
Without
110-240 V ac, 100-250 V dc
110-240 V ac, 100-250 V dc
1.5
Front and Rear Views
The front panel of RT430 comprises a LCD display, two indicators and buttons to navigate through the
screen
.
shows the front view of the equipment.
Figure 1: Front view of the RT430
It has an LCD display (16 columns x 2 lines) for time monitoring and network setup. The display's first screen
shows temporal reference information: day of the week, day, month, year, day of the year, hours, minutes,
seconds, time zone and the number of monitored satellites.
By navigating through the display using the buttons (arrows pointing right and left), it is possible to check the
configuration of the equipment's two Ethernet network. IP addresses, network mask, gateway, broadcast and
DNS server are shown for each network.
The L
OCKED
indicator on, indicates that the equipment is synchronized with time reference from at least 4
GPS satellites.
The Alarm indicator on, indicates that the equipment is not operating and it is necessary the operator's
attention.
, shows the equipment's rear panel components.
