RT412
Chapter 4
–
Installation
24
RT412
Figure 10: Input Selection
Table 2: Jumper Selection of Time Input
Closed Jumper
Electrical Input
Opened Jumper
Optical Input
The jumper connections must use insulated flameproof flexible cable with a 1.5 mm²
cross section, 70 °C thermal class, and 750 V insulation voltage.
Optical Output
The RT412 has 1 output for multimode optical fiber as shown below.
Figure 11: Optical Outputs
The optical and both electrical outputs have the same signal as the one applied in the
time reference input. The length of the optical fiber cables should not exceed 2 km.
Electrical Outputs
The RT412 has 2 electrical TTL outputs, using the Euro Type connector.
Figure 12: Electrical Outputs
Summary of Contents for Reason RT412
Page 2: ......
Page 28: ......
Page 34: ...RT412 Chapter 8 Technical Specification 34 RT412 ...
Page 38: ......