Testing the thermostat.
Heat Test
1.
Slide
Function
switch to
Heat
position.
Heat
mode screen is displayed.
2.
Adjust set temperature so it is
5 degrees above room temperature.
3.
Resistance heat should come on within a few seconds.
4.
Adjust the set temperature so it is 2 degrees below the
room temperature and the heat should turn off.
Note:
There
is a 3 minute time delay and a 3 minute minimum run time
for the compressor when it turns on/off. (On some models,
the fan may also have a minimum run time/off time delay).
12
PM
:
HEAT
