GE PVIG940 and Owner'S Manual And Installation Instructions Download Page 22

Consumer Support. 

GE Appliances Website

GEAppliances.ca

Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, 
any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals,
order parts or even schedule service on-line.

Schedule Service

GEAppliances.ca

Expert Mabe repair service is only one step away from your door. Get on-line and schedule your service at 
your convenience 24 hours any day of the year! Or call 1-800-461-3636 during normal business hours.

Extended Warranties

GEAppliances.ca

Purchase a GE extended warranty and learn about special discounts that are available while your warranty
is still in effect. You can purchase it on-line anytime, or call 1-888-261-2133 during normal business hours. 
Mabe Consumer Home Services will still be there after your warranty expires.

Parts and Accessories 

GEAppliances.ca

Individuals qualified to service their own appliances can have parts or accessories sent directly to their
homes (VISA, MasterCard and Discover cards are accepted). Order on-line today, 24 hours every day or 
by phone at 1-800-661-1616 during normal business hours.

Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally
should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause
unsafe operation. 

Contact Us

GEAppliances.ca

If you are not satisfied with the service you receive from Mabe, contact us on our Website with all the details
including your phone number, or write to: General Manager, Customer Relations, Mabe Canada Inc.

Suite 310, 1 Factory Lane
Moncton, N.B.  E1C 9M3

Register Your Appliance

GEAppliances.ca

Register your new appliance on-line—at your convenience!

Timely product registration will allow for

enhanced communication and prompt service under the terms of your warranty, should the need arise. 
You may also mail in the pre-printed registration card included in the packing material.

Summary of Contents for PVIG940 and

























Reviews: