GE PVIG940 and Owner'S Manual And Installation Instructions Download Page 21

Range Hood Warranty.

For The Period Of:

Mabe Will Replace:

One Year

Any part 

of the range hood which fails due to a defect in materials or workmanship. 

From the date of the

During this 

full one-year warranty, 

Mabe will also provide, 

free of charge, 

all labor and 

original purchase

in-home service to replace the defective part.

Service trips to your home to teach you how to use 
the product.

Improper installation, delivery or maintenance.

Failure of the product if it is abused, misused, or 
used for other than the intended purpose or used
commercially.

Replacement of house fuses or resetting of circuit
breakers.

Damage to the product caused by accident, fire, floods 
or acts of God.

Incidental or consequential damage caused by possible
defects with this appliance.

Damage caused after delivery.

What Mabe Will Not Cover:

All warranty service provided by our Factory Service Centers, or
an authorized Customer Care

®

technician. To schedule service,

on-line, 24 hours a day, visit us at www.GEAppliances.ca, or call
1.800.561.3344.

Staple your receipt here. 

Proof of the original purchase

date is needed to obtain service

under the warranty.

Consumer Support

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Care and Cleaning

21

This warranty is extended to the original purchaser and any succeeding owner for products purchased for home
use within Canada. If the product is located in an area where service by a Mabe Authorized Servicer is not available,
you may be responsible for a trip charge or you may be required to bring the product to an Authorized Mabe Service
Location for service.

Some provinces do not allow the exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights, and you may also have other rights which vary from province to province. To know
what your legal rights are, consult your local or provincial consumer affairs office.

Warrantor: Mabe Canada Inc. Burlington, Ontario

EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this
Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a
particular purpose, are limited to one year or the shortest period allowed by law.

Summary of Contents for PVIG940 and

























Reviews: