8
49-3000244 Rev 5
Settings
Individual settings for cycle minutes (
Time
), dryness level (
Level
) and temperature (
Temp
) can be set from the
minimum (lowest in column) to maximum (highest in column). In general, the higher up the column, the more
energy will be used.
H
I
J
G
Dryness Level Description
Light ON from bottom
indicates setting:
Max Dry
Use for heavy-duty fabrics.
5
More Dry
Use for mixed type fabrics.
4
Dry
Use for a normal dryness level suitable for most loads. This is the
preferred cycle for energy savings.
3
Less Dry
Use for lighter fabrics.
2
Damp
For leaving items partially damp.
1
Temperature
Description
Light ON from bottom
indicates setting:
Hot
For regular to heavy cottons.
5
Medium
For synthetics, blends, delicates and items labeled permanent press.
4
Low
For delicates, synthetics and items labeled tumble dry low.
3
Extra Low
For delicates, synthetics and items labeled extra care or gentle dryness.
2
No Heat
For fluffing items without heat. For use only with the
TIMED DRY
cycle.
1
Wrinkle Care
Use this option to minimize the wrinkles in clothes. It provides 1 hour of no-heat tumbling after the clothes are
dry. If you have
Sound
option enabled and you select the
Wrinkle Care
option, a signal will sound at the end of
the drying time and several times during the
Wrinkle Care
cycle. This will remind you that it is time to remove
the clothes.
Damp Alert
This option causes the dryer to beep when clothes have dried to a damp level. Remove items that you wish
to hang dry. The
Damp Alert
will only beep when this option is selected (but the dry cycle will keep running).
Removing clothes and hanging them when they are damp, can reduce the need to iron some items. The light
beside the button will be lit when
Damp Alert
is on.
NOTE:
On some models this features is only available through the GE Appliances SmartHQ App.
• Remove garments promptly at the sound of signal. Place clothes on hangers so wrinkles will not set in.
• Use the
Damp Alert
especially when drying fabrics like polyester, knits and permanent press. These fabrics
should be removed so wrinkles will not set in.
My Cycle
As the cycle selector knob is turned, the
Time
(timed dry),
Level
(dryness level) and
Temp
(temperature)
settings change to automatic pre-set default settings. If you desire a different setting, press the appropriate
button(s). Then press and hold the
My Cycle
button for 3 seconds and the dryer will “remember” these settings
for that Knob Selection. In the future, when you turn the selector knob to that cycle, your settings will be
automatically recalled.
NOTE:
Signal sound cannot be set for
My Cycle
.
NOTE:
On some models this features is only available through the GE Appliances SmartHQ App.
Washer Link
This feature wirelessly links your washer to your dryer and uses the connection information to automatically
adjust the settings of your dryer for the clothes just washed. If the dryer has a valid WiFi connection, and the
Washer Link
option is selected, either via the button or the App, the light above the button will be lit. If the
option is not selected then the light will turn off. If the dryer does not have a valid WiFi connection, and this
option is selected, either via the button or the App, the WiFi light and the
Washer Link
light will blink and an
error tone will play. NOTE: Signal sound cannot be set for My Cycle.
NOTE:
On some models this features is only available through the GE Appliances SmartHQ App.
Sound
Use the
Sound
button to change the volume of the pad presses and the end of cycle signal. Press the button until
you reach the desired volume or off.
NOTE:
If your model doesn’t have a
Sound
button, press and hold the
Wrinkle Care
button for 3 seconds to toggle
sound option between enabled and disabled. “Sound on” will show on the display and a tone will sound when
enabled. “Sound off” will show on the display and no tone will sound when disabled.
K
L
Using the dryer
U
S
IN
G
T
H
E
D
R
Y
E
R
