GE PSDF5RGXBB - 24.6 cu. Ft. Refrirator, Owner'S Manual

Page: 8 / 136

8
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in
the unlock position.
Place the sides of the drawer into
the drawer supports, making sure
the swing locks fit on the drawer slots.
Lock all four swing locks by rotating them
to the lock position.
How to Remove and Replace the Drawer
Empty the pan. Place the Chill tray in the
pan. Place the items on the tray and close
the pan completely.
Select the
ExpressChill ™
pad. On some
models, you can then select the chill time
(use chart to determine best setting). Other
models will only have one option (45
minutes). On models with multiple settings,
tap the pad until the light appears next to
the desired setting.
To stop a feature before it is
finished, tap that feature’s pad
until no options are selected and
the display is off.
During
ExpressChill
, the display on the
controls will count down the time
in the cycle.
About ExpressChill ™ .
(on some models)
GEAppliances.com
The
ExpressChill ™
feature is a system
of dampers, a fan and a temperature
thermistor.
The pan is tightly sealed to prevent the pan’s
temperature from causing temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located in the top
of the refrigerator or on the dispenser with the
temperature controls.
How to Use
How it Works
ExpressChill ™