Installation Instructions
REPLACING THE DOORS
(Double Door Refrigerator Models only)
INSTALL CENTER HINGE
Install the center hinge on each side.
REHANG REFRIGERATOR DOORS
Lower the refrigerator door onto the
center hinge pin. Ensure that the white
hinge pin thimble is on the center hinge
pin or inside door hinge pin hole located
in the bottom of the door.
Securely tape the door shut with masking
tape or have a second person support
the door.
Route wires through top hinge pin slot.
Insert the top hinge pin into the hinge hole
on top of the refrigerator door. Make sure
the door is aligned with the cabinet and
opposite door. Attach the hinge to the top
of the cabinet loosely with the bolts.
Reconnect the wire connector and
reconnect the ground wire using the screw
removed earlier. Ensure that the wire
connector is fully engaged.
IMPORTANT:
The ground wire must be
reinstalled to ensure a proper ground.
A
B
REHANG REFRIGERATOR DOORS (CONT.)
Make sure the gasket on the door is
flush against the cabinet and is not folded.
Make sure the door is straight and the gap
between the doors is even across the front.
While holding the aligned door in place,
tighten the top hinge bolts. Replace the
hinge cover and screw.
E
C
Hinge Pin
Thimble
Top Hinge
Pin Slot
Top Hinge
Pin
Wire
Connector
Ground Wire
Top Hinge Bolts
Hinge Cover
ALIGN DOUBLE DOORS
If the top of the doors are uneven, first
try to raise the lowest door by turning the
leveling leg on the same side as the door
until the doors are even. If the unit rocks,
re-adjust the leveling legs to the extent
that the unit is stable.
If the doors remain uneven, use a C spacer
to align the doors. While lifting the door
on the hinge side with one hand, insert a
C spacer with pliers. Continue to add C
spacers until the doors are even.
C Spacer
REPLACE FREEZER DRAWER
Refer to the Replacing the Freezer Drawer
section for instructions.
5
D
30
REPLACE OPPOSITE DOOR
Follow the same procedure on the
opposite door.
(appearance may vary)
(appearance may vary)
4
3
2
2
1
