
Questions?
Use this
problem
solver
Advantium Oven
Troubleshooting
38
Problem
Possible Causes
What To Do/Explanation
DISPLAY
The display is blank. The display has
• Check the SETTINGS menu for clock
been turned off.
display settings. Turn the display on.
“Control Panel
The control has
• Press and hold CLEAR/OFF for about
LOCKED” appears
been locked.
3 seconds to unlock the control.
in display.
See
Other Features Section
.
Control display is
Clock is not set.
• Follow prompts to set the clock.
lighted yet oven
Door not securely closed. • Open the door and close securely.
will not start.
START/PAUSE pad
• Follow prompts
not pressed after entering
cooking selection.
Delay Start was
• Press CLEAR/OFF and reset.
accidentally set.
Oven is in DEMO Mode
• Unplug the oven for 1 minute, plug
the oven back into the wall DO NOT set
the oven clock, press and hold the HELP
and START/PAUSE pads for 3 seconds.
The control should exit DEMO mode.
Set clock and continue.
CLEAR/OFF was pressed
• Reset cooking program and press
accidentally.
START/PAUSE.
OTHER PROBLEMS
The door and inside The oven
• This is normal.
of the oven feels hot. produces intense heat
• Use oven mitts to remove food when
in a small space.
when ready.
Floor of the oven is
The cooktop light is
• This is normal.
warm, even when
located below the oven
the oven has not
floor. When the light
been used.
is on, the heat it produces
may make the oven floor
get warm.
Oven will not start.
A fuse in your home
• Replace fuse or reset circuit breaker.
may be blown or the
circuit breaker tripped.
Power surge.
• Unplug the oven, then plug it back in.
Plug not fully inserted
• Make sure the plug on the oven is
into wall outlet.
fully inserted into wall outlet.
Glass microwave
• Align the protrusions on the bottom of
tray does not lock
the glass microwave tray with the
into center hub.
indentation in the turntable. This fit is
not tight, some movement is normal.
Summary of Contents for Profile Advantium PSA2200R
Page 78: ...Nota Horno Advantium 38...