6
49-1000471 Rev. 1
USING THE REFRIGERA
T
O
R:
Controls
Controls
(on some models)
Filter
Status
Freezer Compartment Temperature Control
$GMXVWIUHH]HUFRPSDUWPHQWWHPSHUDWXUH7KH
IUHH]HUWHPSHUDWXUHLVSUHVHWLQWKHIDFWRU\DW
0°F
(-17.8°C)
$OORZKRXUVIRUWHPSHUDWXUHWRVWDELOL]H
to the preset recommended setting.
Fresh Food Compartment Temperature Control
Adjust fresh food compartment temperature. The
fresh food temperature is preset in the factory at
37°F (2.8°C)
. Allow 24 hours for temperature to
VWDELOL]HWRWKHSUHVHWUHFRPPHQGHGVHWWLQJ
Door Alarm
(on some models)
To set the alarm, press this pad until the indicator
light comes on. This alarm will sound if either door is
open for more than 3 minutes. The light goes out and
the beeping stops when you close the door.
LED dispenser Light
Press
the
Light
pad to turn your dispenser light on
and off.
Filter Status
Press
the
Filter Status
pad to display the water
filter’s life percentage (%).
TurboCool TM (on some models)
TurboCool ™ rapidly cools the refrigerator
compartment in order to more quickly cool foods.
Use TurboCool ™ when adding a large amount
of food to the refrigerator compartment, putting
away foods after they have been sitting out at room
WHPSHUDWXUHRUZKHQSXWWLQJDZD\ZDUPOHIWRYHUV,W
can also be used if the refrigerator has been without
power for an extended period.
NOTES:
The refrigerator temperature cannot be
changed during
TurboCool™
.
7KHIUHH]HUWHPSHUDWXUHLVQRWDIIHFWHGGXULQJ
TurboCool™
.
When opening the refrigerator door during
TurboCool™
, the fans will continue to run if they
have cycled on.
Lock Controls
Press and hold the
Lock Controls
pad for 3
seconds to lock out ice and water dispenser and all
other controls. Press and hold to unlock the controls.
COMPRESSOR
7RWXUQRႇFRPSUHVVRU
5DLVHWKHIUHH]HUWHPSHUDWXUHDERYHWKHKLJKHVW
setting by pressing the
Freezer
warmer pad until the
display starts blinking.
2. Raise the
Fresh Food
temperature above the highest
VHWWLQJXQWLO\RXVHH2))
To turn on the compressor:
1. Press
Fresh Food
or
Freezer
colder pad.
NOTE:
Compartment lights and the user interface
display will stay on.
The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator
DQGIUHH]HU7KHDFWXDOWHPSHUDWXUHPD\YDU\VOLJKWO\IURPWKH6(7WHPSHUDWXUHEDVHGRQXVDJHDQGRSHUDWLQJ
environment.
The temperature controls are preset in the factory
at
37°F (2.8°C)
for the refrigerator compartment
and
0°F (-17.8°C)
IRUWKHIUHH]HUFRPSDUWPHQW
$OORZKRXUVIRUWKHWHPSHUDWXUHWRVWDELOL]HWR
the preset recommended settings.
Summary of Contents for Profile 27 Series
Page 43: ...49 1000471 Rev 1 43 Notes...
Page 87: ...49 1000471 Rev 1 43 Notes...
Page 131: ...49 1000471 Rev 1 43 Notas...
