28
49-1000471 Rev. 1
Installation Instructions
INSTALLING THE REFRIGERATOR
(Cont.)
PUT THE REFRIGERATOR IN
PLACE
Move the refrigerator to its final location.
LEVEL THE REFRIGERATOR
The refrigerator can be leveled by adjusting the
rollers located near the bottom hinges.
Rollers have three purposes:
• Rollers adjust so the door closes easily when
opened about halfway. (Raise the front about
´>PP@IURPWKHIORRU
• Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
• Rollers allow you to move the refrigerator
away from the wall for cleaning.
To adjust the rollers on 23’ (33” wide),
25’, 26’, 27’ and 29’ models:
• Turn the roller adjusting screws clockwise
to raise the refrigerator, counterclockwise to
ORZHULW8VHD´KH[VRFNHWRUZUHQFKRU
an adjustable wrench.
4
5
Rollers
Raise
Roller adjusting screw
LEVEL THE DOORS
Adjust the refrigerator door to make the doors
even at the top.
To align:
8VLQJD´ZUHQFKWXUQWKHGRRUDGMXVWLQJ
screw to the right to raise the door, to the left
to lower it.
NOTE:
A nylon plug, imbedded in the threads of the
pin, prevents the pin from turning unless a
wrench is used.
After one or two turns of the wrench, open
and close the refrigerator door and check the
alignment at the top of the doors.
6
A
B
'RRUVVKRXOGEHHYHQDWWRS
Raise
´ZUHQFK
LEVEL THE REFRIGERATOR
(cont.)
To adjust the
rollers on 23’/25’
CustomStyle
™
models:
Turn the front roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to
lower
LW8VHD´KH[ZUHQFKZLWKH[WHQVLRQ
or an adjustable wrench.
These models also have rear adjustable
rollers so you can align the refrigerator with
\RXUNLWFKHQFDELQHWV8VHD´KH[ZUHQFK
with extension to turn the screws for the rear
rollers—
clockwise to raise
the refrigerator,
counterclockwise to lower
it.
5
Roller adjusting screws
INST
ALLA
TION INSTRUCTIONS
Summary of Contents for Profile 27 Series
Page 43: ...49 1000471 Rev 1 43 Notes...
Page 87: ...49 1000471 Rev 1 43 Notes...
Page 131: ...49 1000471 Rev 1 43 Notas...
