Installation Instructions
UNPACKING YOUR COOKTOP
• Blower assembly
• Blower plenum
• (4) Nuts (10-32 keps – nuts with
lock washers attached)
• (9) Sheet metal screws
(8-18 x 3/8
″
)
• Foam gasket tape (9 ft. roll)
• Vent grille
• Vent filter
• Cleaning cream
• Scrub sponge or scraper
(on some models)
PARTS INCLUDED (PACKED BELOW THE COOKTOP)
Vent Grille
Cleaning Cream
Scrub Sponge
Sheet Metal Screws
(9) (8-18 x 3/8
″
)
Foam Gasket Tape
Blower Assembly and (4) Mounting
Nuts (10-32 keps – nuts with lock
washers attached)
Blower
Plenum
14
Vent
Filter
CAUTION:
GLASS IS FRAGILE
DO NOT BUMP EDGE OF GLASS DURING
INSTALLATION
CAUTION:
DO NOT LIFT
FROM VENT
OPENING OR
BUMP GLASS
Check to be sure that all packing materials
and tape have been removed. This will include
tape on control knobs (if applicable), adhesive
tape, wire ties, cardboard and protective
plastic. Failure to remove these materials could
result in damage to the appliance once the
appliance has been turned on and surfaces
have heated.