GE PanaFlow MV80, User Manual

Page: 79 / 164

PanaFlow™ MV80 & MV82 User’s Manual 67
Chapter 3. Operating Instructions
3.3.10 The Units Menu
Use the Units Menu (see Figure 62 below) to configure the flowmeter with the desired units of measurement. These are
global settings and determine what appears on all screens.
Figure 62: The Units Menu
Units
Menu
Password
ENTER
ENTER
Use
keys to access menus
Run Mode
Temperature Unit
Deg F, Deg C,
Mass Flow Unit
lb, Ston, Lton, gram,
kg, Mton, scf, nm3
sec, min, hr, day
Ston = Short Ton = 2000 lb
Lton = Long Ton = 2240 lb
Mton = Metric Ton = 1000 kg
Volume Flow Unit
gal, MilG, ImpG, bbl,
lit, MilL, m3, ft3
sec, min, hr, day
MilG = Million gallons
Igal = ImperiaI gallon = 1.20095 US gallons
bbl = barrels = 42 US gallons
MilL = Million liters
Kelvin, Rankine
Gauge Pressure Unit
Absolute/Gauge
Atm. Pressure
14.6959
Menu is activated only if
Gauge Pressure is chosen.
Transducer reads in Absolute.
If Gauge is desired, atmospheric
pressure at meter is needed.
Energy Unit
MWHr, kWHr, HPHr,
MCal, MJ
sec, min, hr, day
BTU, MBTU, MMBT,
MBTU = Thousand BTU
MMBTU = Million BTU
Density Unit
lbm/gal, gm/mlit, kg/lit,
gm/lit, lbm/in3
lbm/ft3, kg/m3, gm/cc
Pressure Unit
mmH2O, in HG, mmHG
ATM, Bar, mBar
gm/cm2, kg/cm2,
psi, inH2O, ftH2O,
4inH2O and 4mmH2O are
based on water at 4°C.
Pascal, MegaPa, Torr,
4inH2O, 4mmH2O
Enter the value in PSIA.