Chapter 3. Configuration
82
PACSystems* RX3i & RSTi-EP PROFINET IO-Controller User Manual
GFK-2571N
Once a LAN is selected, click on
Refresh Device List
to display a list of actual devices on the LAN. Each device
can be in one of three conditions as indicated by the symbol in the
Status
column:
indicates that the
Device Name, IP Address, Subnet
and
Gateway
of the actual device matches the
configured device of the same
Device Name
residing on the selected LAN.
indicates that the
Device Name
of the actual device matches, but the
IP Address, Subnet
, or
Gateway
does not match the configured device of the same
Device Name
residing on the selected LAN.
indicates that the
Device Name
of the actual device does not match any configured device residing on
the selected LAN. Either there is no such
Device Name
configured in the system, or the device with
that
Device Name
resides on a different LAN.
Figure 88: List of Device Names on LAN with Status Indications
If the
Device Name
of the device on the network is not correct, select the target device in the list of networked
devices, and click
Edit Device
. This will open a new dialog that can be used to set various parameters, including
Device Name
, directly on the device.
Note:
For the PROFINET Controller to successfully deliver configuration to a device, only the
Device Name
is
required to match the configuration.
