Chapter 3. Configuration
GFK-2571N
May 2018
71
3.7.3
Adding VersaMax Modules to a Remote Node
The PNS remote node can contain the module types listed in the
VersaMax PROFINET Scanner Manual,
GFK-2721
.
However, it cannot contain the following expansion modules or communications modules:
Unsupported VersaMax Modules
Asi Network Master Module
IC200BEM104
DeviceNet Network Control Module
IC200BEM103
Expansion Transmitter Module
IC200ETM001
Expansion Receiver Module, Isolated
IC200ERM001
Expansion Receiver Module, Non-isolated
IC200ERM002
Profibus-DP Network Slave Module
IC200BEM002
To add a module to the remote node, right click on the
VersaMax PNS
icon in the
Navigator
and select
Change
Module List
. In the right pane of the
Change Module List
window, expand the list of VersaMax module types.
Figure 65: Adding VersaMax I/O Modules to Remote Node
Select modules from the list (right pane) and drag them to available slot locations in the remote node (left
pane).
Figure 66: Select VersaMax Module from Available List
To delete a module from the left-side pane, select it and press the keyboard Delete key. When the modules in
the left side pane are correctly situated, click OK to add them to the
Configuration
.
