NX-1348E-ICON
- 8 -
g
GE Interlogix
ENTER CODE ICON
The
enter code
icon is on whenever a valid code should be entered on the keypad.
1
..
48
ZONE ICON
The
zone
icons are “off” when everything is normal. A
zone
icon will be “on” if the zone has been bypassed. If
a
zone
icon is “flashing”, that zone is in alarm or has been faulted. If a
zone
icon is “flashing” rapidly, it means
that the zone is in a trouble condition.
Understanding the LED’s
STAY
LED
The
stay led
is “on” when all interior (motion detector) zones are bypassed.
CHIME LED
The c
hime led
is “on” when the chime feature is “on”; “off” otherwise.
EXIT LED
The
exit led
is “on” during the exit delay. Please note that the led will flash during the
last 10 seconds of the exit delay as a warning that the time is running out. (The user may want
to disarm the system if the
exit led
is flashing in order to prevent an alarm. The user may
then re-arm the system and exit before the delay expires.)
BYPASS LED
The
bypass led
is “on” when any zone in this keypad’s partition is bypassed. The zone(s)
that is bypassed will also be illuminated. If the
bypass led
is “off”, no zones are bypassed.
CANCEL LED
The
cancel led
will flash during an abort delay time. If a code is entered followed by the
[
CANCEL
] key while this led is flashing, all abortable reports will stop the communication
process.
Note: The abort feature must be enabled
. Entering a code followed by the
[
CANCEL
] key during or after an alarm report to the central station will cause the
cancel
led
to come on. It will stay on until the central station has received the cancel report.
Note: The cancel feature must be enabled.