GE NX-1348E-ICON, User Manual, Page: 12 / 20

NX-1348E-ICON - 12 -
g
GE Interlogix
ADDING AND CHANGING USER CODES
Your system must be
Disarmed to change user codes.
Step 1 Press [
r
]-[ 5 ]
Step 2 The Enter Code icon will display. Enter a [“ Master Arm/Disarm” Code ].
N
For partitioned systems, someone changing the code of another person must have access to all or more
partitions than the user being changed.
Step 3 The Ready led will flash.
Step 4 Enter the 2-digit “user number”.
(Always enter 2 digits such as [ 0 ]-[ 3 ] for user 3.)
Step 5 The instant icon will flash and zone icons will illuminate specifying the first digit of the “user code”.
When all icons are all illuminated = code is blank; when all icons are off = “0”.
Use the [
•
] and [
–
] keys to view the next digit or enter new 4- or 6-digit “user code”.
While using the [
•
] and [
–
] keys, you can change any digit by entering a new digit. This will advance you to
the next digit.
To delete a user code, enter [
r
]-[
r
]-[
r
]-[
r
] for a 4-digit code, or [
r
]-[
r
]-[
r
]-[
r
]-[
r
]-[
r
] for a 6-digit code.
Step 6 The
ready led will flash indicating you are back at Step 2 above. If the code is rejected, the sounder will beep 3
times.
Step 7 If another “user code” needs to be programmed, return to Step 4.
Step 8 Press the [
# ] key while the ready led is flashing to exit the User Code Programming Mode.