NX-10 User Manual 9
Quick User menu
You can access a limited number of menu options, without entering a
user code, through the Quick User menu. Press OK, and then press
keys to enter and navigate the command menu.
Changing the user interface language
To change the language on your keypad, press
OK
repeatedly to find
the required language. See page 22 for more information.
User menu
Your user code allows you to perform certain keypad functions
through the user menu. A master user code allows you to perform ALL
keypad functions. A master user is the only person allowed to edit user
information and rights in the system. To access the user menu, press
OK
at the default display and enter your user code. Only those menu
options to which you have rights are displayed. Press
to navigate
the user menu.
Note
Your keypad may work slightly differently, depending on how it was set
up by your installer.
Navigating the menus
Press to move through different menu options.
The quick user menu and the user menu contain lists of entries such
as users and zones.
Press
#
to move to the same menu option for the previous entry in
the list. For example, if you are viewing the user code for user 2, press
#
to view the user code for user 1.
Press
#
to move to the same menu option for the next entry in the
list. For example, if you viewing the user code for user 2, press
#
to
view the user code for zone 3.
Exiting the menu system
• Press
##
to display the
OK to Exit
prompt (if editing data, press
NO
first).
• Press
OK
at this prompt to exit the menu system.
Note:
The keypad may timeout from the menu system and return to
the default display.
Note:
Press
NO
key to clear any incorrectly entered user code or other
information.
Note:
After exiting the menu or after waking up, the wireless keypad
checks the system state for about 3 seconds. Please allow appropriate
time for the wireless keypad to finish its actions.
Using the NX-10 menus