manualshive.com logo in svg

GE NetworX NX-6V2, Installation And Startup

Share
Download
GE NetworX NX-6V2 Installation And Startup Download Page 17

 

NX-6V2 Control 

 

17 

DATA 

DESCRIPTION OF DEFAULT ZONE TYPES 

9 

ENTRY/EXIT DELAY 2- 

A trip will start entry delay 2.  The lack of a trip during exit delay will enable the Automatic 

Bypass or Instant mode if so programmed. 

 

10 

24-HOUR SILENT SUPERVISED- 

Creates an instant silent alarm regardless of the armed state of the control panel. It 

will display on the keypad.

 

11 

KEYSWITCH ZONE - 

This zone type will arm and disarm the partition or partitions of the control panel that it resides in 

each time the zone is shorted. Keyswitch arming will report as user #99. 

12 

INTERIOR FOLLOWER WITH "CROSS ZONE" ENABLED

 - This zone will be instant when the system is armed and no 

entry or exit delay is being timed. It is delayed during entry and exit delay times. If a "Cross Zone" is not being timed it will 
start a "Cross Zone" timer. If a "Cross Zone" is being timed it will create an instant alarm. This zone will automatically 
bypass when enabled in Segment 1 of Location 23.

 

13 

INSTANT ENTRY GUARD - 

This zone creates an instant alarm whenever it is tripped and the Stay LED is off.  It will start 

an entry delay time 2 if it is tripped and the system is armed and the Stay LED is on.

 

14 

ENTRY/EXIT DELAY 1 WITH GROUP BYPASS ENABLED -

 A trip will start entry delay 1.  This zone will bypass when 

the "Group Bypass" command is entered at the keypad.   The lack of a trip during exit delay will enable the Automatic 
Bypass or Instant mode if so programmed.

 

15 

INTERIOR FOLLOWER WITH GROUP BYPASS ENABLED - 

This zone will be instant when the system is armed and no 

entry or exit delays are being timed. It is delayed during entry/exit delay times. This zone will bypass when the "Group 
Bypass" command is entered at the keypad. This zone will automatically bypass if enabled in Segment 1 of Location 23.

16 

INSTANT WITH GROUP BYPASS ENABLED  - 

This zone creates an instant alarm whenever it is tripped and the Armed 

LED is on. This zone will bypass when the "Group Bypass" command is entered at the keypad.

 

17 

ENTRY/EXIT DELAY 1 WITH TAMPER ENABLED- 

A trip will start entry delay 1.  The lack of a trip during exit delay will 

enable the Automatic Bypass or Instant mode if so programmed. 

This zone type can be used to enable tamper on a 

wireless transmitter. 

18 

INTERIOR FOLLOWER WITH TAMPER AND AUTO-BYPASS ENABLED -

This zone will be instant when the system is 

armed and no entry or exit delay is being timed. It is delayed during entry and exit delay times. This zone will 
automatically bypass if enabled in Segment 1 of Location 23.

 This zone type can be used to enable tamper on a 

wireless transmitter. 

19 

INSTANT WITH TAMPER ENABLED

 - This zone creates an instant alarm whenever it is tripped and the Armed LED is 

on. This zone type can be used to enable tamper on a wireless transmitter. 

20 

ENTRY/EXIT DELAY 2 WITH TAMPER ENABLED-

A trip will start entry delay 2.  The lack of a trip during exit delay will 

enable the Automatic Bypass or Instant mode if so programmed.

This zone type can be used to enable tamper on a 

wireless transmitter. 

21 

GAS DETECTION- 

Creates an instant alarm regardless of the armed state of the control panel. It will display on the 

keypad and activate the keypad sounder.

 

22 

LOW TEMP DETECTION- 

Creates an instant silent alarm regardless of the armed state of the control panel. It will display 

on the keypad and activate the keypad sounder.

 

23 

HIGH TEMP DETECTION- 

Creates an instant silent alarm regardless of the armed state of the control panel. It will 

display on the keypad and activate the keypad sounder.

 

24 

MANUAL FIRE - 

This zone will illuminate the Fire LED and sound the temporal siren each time the zone is shorted. It will 

also rapidly flash the Fire LED indicating a trouble if the zone is open. 

 

25 

CHIME ONLY -

 Creates no alarm regardless of the armed state of the control panel. It will chime anytime it is faulted and 

will display on the keypad. Local only.

 

26 

INTERIOR FOLLOWER DELAY 2 -

This zone will be instant when the system is armed and no entry or exit delay is 

being timed. It is delayed during entry and exit delay 2 times. This zone will automatically bypass if enabled in Segment 1 
of Location 23.

 

27 

INTERIOR FOLLOWER FORCE ARMABLE -

This zone will be instant when the system is armed and no entry or exit 

delay is being timed. It is delayed during entry and exit delay 1 times. This zone will automatically bypass if enabled in 
Segment 1 of Location 23.

 

28 

ENTRY/EXIT FORCE ARMABLE DELAY 2 -

A trip will start entry delay 2.  The lack of a trip during exit delay will enable 

the Automatic Bypass or Instant mode if so programmed.

 

29 

INTERIOR FOLLOWER WITH ACTIVITY SUPERVISION ENABLED -

This zone will be instant when the system is 

armed and no entry or exit delay is being timed. It is delayed during entry and exit delay times. It will send a report if the 
zone activity time is reached without a change of state. Refer to Location 40 / Segment 11. This zone will automatically 
bypass if enabled in Segment 1 of Location 23.

 

30 

ENTRY/EXIT WITH ACTIVITY SUPERVISION ENABLED-

 A trip will start entry delay 1. It will send a report if the zone

activity time is reached without a change of state. Refer to Location 40 / Segment 11.  The lack of a trip during exit delay 
will enable the Automatic Bypass or Instant mode if so programmed.

 

 

Summary of Contents for NetworX NX-6V2





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands