QUICKSTART GUIDE
UR SWITCH MODULE – QUICKSTART GUIDE
QS–15
QS.4.1
Hardware Overview
The 2S and 2T managed Switch modules provide two 10/100 BaseT and four Multi-mode
ST 100 base Fx external Ethernet ports in addition to a serial console port.
FIGURE QS–7: Rear View Showing I/O Ports
FIGURE QS–9: Front View Showing Console Port
QS.4.2 2S and 2T LED indicators
The function of the 2S and 2T Switch modules LED indicators is as shown below.
Copper ports have 3 LEDs indicating:
1.
10 or 100 MB
2.
Full or Half Duplex
3.
Linkup and Activity
Fiber Ports have 1 LED indicating:
1.
Linkup and Activity
2 x 10/100BaseT Ports
4 x 100Mb FX multimode
ports with ST connectors
Independent Power Supply
Options: 2S - HI P/S
2T - LO P/S
Table QS–8: Console Port Pin Assignment
Pin
Signal
Description
1
CD
Carrier Detect (not used)
2
RXD
Receive Data (input)
3
TXD
Transmit Data (output)
4
open
not used
5
GND
Signal Ground
6 to 9
open
not used
