GE Multilin GEK-113000T, User Manual

Page: 128 / 259

GEK-113000T F650 Digital Bay Controller 4-1
4 SECURITY 4.1 ADDING USERS
4
4 SECURITY 4.1 ADDING USERS
New users can only be added by users that have Administrator Access (or Admin Rights) . The Enable Security check
box located in the Security -> User Management window must be enabled.
Remember: ( In order to add new users and assign user rights )
• must be logged in with Administrator Permission
• and Enable Security checkbox must be enabled
4.1.1 USER RIGHTS
NOTE: Only Administrators have access to the User Management dialog box.
Following is a list of all of the User Rights Options available to be granted to users, and their functions.
Table 4–1: USER RIGHTS AND FUNCTIONS
By default, Administrator and Service users are created with "password" as default password.
RIGHT FUNCTION
Delete Entry
If this box is checked when the Administrator exits the User Management dialog box, the program will ask you to
confirm the delete and if the Administrator chooses "yes", then the user whose "Delete Entry" box was checked
will be permanently deleted from the list.
Admin.
WARNING: When this box is checked, the user will become an EnerVista 650 Setup Administrator, therefore
receiving all of the Administrative rights.
Actual Values
When this box is checked, the user will have the ability to view Actual Values and all records excluding event
recorder.
Settings
When this box is checked, the user will have access to view and modify Settings (Protection, control, inputs/
outputs and calibration) .
Commands When this box is checked, the user will be able to use Commands .
Event Recorder When this box is checked, the user will have access to use Event Recorder .
Force IO When this box is checked, the user will be able to use Force IO application.
Logic Configuration
When this box is checked, the user will have the ability to view and modify Relay Configuration and Logic
Configuration .
Upgrade
When this box is checked, the user will have the ability to upgrade firmware, bootware and to upload and
download info files to/from relay.