REMOvE REFRIGERATOR DOOR
2
1.
Remove all food from the inner door liner .
2.
Tape the door shut with masking tape .
3.
Remove the center hinge by removing two hinge
screws with a 5/16
″
socket and ratchet . Save the
center hinge and screws .
4.
Remove the tape and tilt the door away from the
cabinet . Lift the door straight up to free its bottom
socket from the pin in the bottom hinge bracket .
5.
Transfer plastic bushing from right side of top of
refrigerator door to the left side .
6.
Set the door on a non-scratching surface with the
inside up .
7.
Install the 2 hole plugs from the opposite side of
the cabinet to the screw holes vacated by the
center hinge removal .
TRANSFER BOTTOM HINGE TO THE
LEFT
1.
Using a 5/16 Socket
and ratchet, remove
the 2 screws from the
bottom hinge .
2.
Move the bottom
hinge pin from the
right to the left side
with a thin-blade
screwdriver until the
shoulder of the hinge
pin is touching the
hinge .
3.
Move the bottom
hinge from the right
to the left side and
tighten the 2 screws .
4.
Install the 2 hole
plugs from the
opposite side of the
cabinet to the screw
holes vacated by
the bottom hinge
removal .
TRANSFER DOOR STOP TO THE LEFT
1.
On both the refrigerator and freezer doors,
remove the screws from the door stop on the
right with a Phillips screwdriver .
2.
Install the door stop on the left of each door .
3
4
Installation Instructions
REvERSING THE DOOR SWING
(CONT.)
1” = 2 .5 cm; 1’ = 0 .3 m
11
