Installation Instructions
INSTALLATION—VENTED TO THE OUTSIDE
INSTALL FILTERS
IMPORTANT:
Check to be sure that the main ON/OFF
switch next to the motor is in the ON position.
•
Remove protective films on the grease filters and
filter cover panel.
NOTE:
The charcoal filter is not required for this
installation.
•
Tip the filter into the left or right side of
the opening. Lift the filter to the opposite
side and into the filter lock.
•
To remove the filter, push the latch toward
the center and pull downward.
•
To close the filter cover panel, push up on both
sides at the front corners to engage the latch.
8
FINALIZE INSTALLATION
•
Check to be sure all tape and packaging materials
have been removed.
•
Refer to the Owner’s Manual for operating
instructions.
9
Push-button
switch
(horizontal
view from
inside
opening)
13
Summary of Contents for Monogram ZV830
