Save time
and money!
Review the
troubleshooting
tips on this
page first and
you may not
need to call
for service.
PROBLEM
POSSIBLE CAUSE
WARMING DRAWER
• A fuse in your home may be blown or the circuit breaker tripped.
WILL NOT WORK
Replace the fuse or reset the circuit breaker.
• Warming drawer not plugged in. Plug in.
• Warming drawer controls improperly set. See the Using the
Warming Drawer section.
DRAWER DOES NOT
• Ball bearings are out of alignment. Fully extend the drawer and
SLIDE SMOOTHLY
push it all the way in. See the Care and Cleaning section.
OR DRAGS
• Drawer over-loaded or load unbalanced. Reduce weight to less than
50 pounds. Redistribute drawer contents.
EXCESSIVE
• Liquid in warming drawer. Remove liquid.
CONDENSATION
• Uncovered foods. Cover food with lid or aluminum foil.
• Temperature setting too high. Reduce temperature setting.
• Incorrect Moisture Selector setting. Set the Moisture Selector to
the open vent setting to allow venting.
NO HEAT IN THE
• Room temperature may prevent the thermostat from tripping on.
PROOF SETTING
Turn the knob to
LOW
then back to
PROOF.
FOOD DRIES OUT
• Moisture escaping. Cover food with lid or aluminum foil.
12
Before You Call For Service…
Electric Warming Drawer
