16
Installation
Component Cooktop System
Front of Countertop
Front of Countertop
Joining additional cooktop to downdraft vent
or to downdraft grill
• Remove endcap on the side of the next
cooktop to be joined.
• Pre-tap holes in downdraft joiner and
endcaps by driving supplied screws through
holes and then backing out before
installation. This will make the joining
process easier.
• Attach downdraft joiner strip to cooktop.
• Place cooktop next to downdraft vent in the
cutout.
• Drive two phillips head screws into pre-
tapped holes. Use a phillips screwdriver bit
socket.
• To install additional vent or cooktop(s),
refer to “Joining Multiple Cooktops.”
• Loosen screws on hold-down brackets at
each end of cooktop. Extend the bracket to
reach the underside of the countertop.
Tighten screws.
• Drive a long screw (2 lengths are provided)
through the bracket until screw is tight
against the bottom of the countertop.
4
Step
Secure
Cooktop(s)
to Countertop
Joining
Multiple
Cooktops
(Continued)