GE Monogram ZDIB50, Use & Care Manual And Installation Instructions

Page: 12 / 44

12
DOOR AND ACCESS PANELS
Changing the Bin Door Panel
You can easily change the color of the front panels by
flipping them over to show either black or white.
You can also order stainless steel panels by calling
Parts and Accessories, 800-626-2002. Specify kit
number ZDP50.
To create custom wood panels to match existing
cabinets, see the section on Custom Door and Access
Panels.
To change the panel:
1. Open the storage bin door. Remove the two screws
on the top of the door which hold the handle.
2. Loosen the screws in both of the side trim pieces.
3. Remove the handle and the handle insert.
4. Carefully slide the panel out. You will find the
reverse side is black. For units with black panels
showing, the reverse side will be white.
5. Choose the color you want to show and carefully
slide the panel back into the door.
NOTE: Be careful not to scratch the panel as it is
inserted.
6. Replace the handle insert and tighten the screws in
both side trim pieces. Replace the handle and screws.
Handle
Handle
Insert