– 10 –
Middle Spray Arm
Check the holes in the spray arm for bits of china,
seeds, and other foreign matter. Also, check the
spray arm for rotation.
Removal and Replacement
1. Pull the upper rack all the way out.
2. Remove the plastic screw on the bottom of
the middle spray wash arm. This will allow
the middle spray arm and bearing to be
removed.
Note:
Install middle spray wash arm with spray
jets facing the upper rack. Place bearing between
spray arm screw and bottom of the middle arm.
Components
Note:
If the upper rack experiences poor cleaning
problems, ensure the middle spray wash arm
is turning freely. If not, disassemble the middle
spray wash arm and clean the bearing surface,
then reassemble.
Using the Dishwasher with the Upper
Rack Removed
1. Unsnap and remove the end cap on each side
of the rails.
2. Pull the rack straight out and off the rails.
3. Replace the end caps.
4. Push the rails all the way back into the
dishwasher.
5. Slide the shower nozzle attachment over the
spout.
6. The dishwasher is now ready for use.
Note:
Always use the shower nozzle when the
upper rack is removed.
