58
MDS 4790M (MPT 1411) I/O Guide
MDS 05-3628A01, Rev. B
Note: This screen is associated with Network-wide Diagnostics. For more
information, refer to the Network-wide Diagnostics manual (P/N 05-3467A01)
available from GE MDS.
Diagnostic Type
This screen is used to set or display the radio’s function in a network-wide
diagnostics system. The allowable settings for the radio are Node, Root, Gate and
Peer.
Note: This screen is associated with Network-wide Diagnostics. For more
information, refer to the Network-wide Diagnostics manual (P/N 05-3467A01)
available from GE MDS.
Transmit Level
[–20 to +3, AUTO]
This screen is used to set or display the radio’s audio transmit level when the radio
is operating as an analog device. The audio transmit level can be set from –20 to
+3 dBm, or it can be set to adjust automatically.
To change the audio transmit level, press ENTER.
You do not need to use the
left/right arrow buttons to select a digit
. Instead:
To increase the transmit level, press the up or left arrow button (
).
To decrease the transmit level, press the down or right arrow button (
).
Press ENTER again to make the change.
Receive Level [–20
to +3]
This screen is used to set or display the radio’s audio receive level when the radio is
operating as an analog device. The audio receive level can be set from –20 to +3 dBm.
To change the audio receive level, press ENTER.
You do not need to use the
left/right arrow buttons to select a digit
. Instead:
To increase the receive level, press the up or left arrow button (
).
To decrease the receive level, press the down or right arrow button (
).
Press ENTER again to make the change.
Transmit Gain
This screen is used to enable or disable the transmit audio boost for the transmit
audio level.
Receive Pad
This screen is used to enable or disable the receive attenuator for the receive audio
level.
DLINK [ON/OFF/xxxx]
command, page 33
Diagnostic Type
Node
DTYPE
[NODE/ROOT/GATE/PEER]
Transmit Level
-1 dBm
TXLEVEL [–20 to +3, AUTO]
command, page 44
Receive Level
-1 dBm
RXLEVEL [–20 to +3] command
page 39
Transmit Gain
disabled
TXGAIN [ON/OFF] command,
page 44
Receive Pad
disabled
RXPAD [ON/OFF] command,
page 40
