Masoneilan SVi1000 Bench Quick Start Manual
=
|
9
© 2016 General Electric Company. All rights reserved.
13. Check that the SVi1000 is connected (see red oval in Figure 7).
Figure 7 Connected
If not it does not connect:
Right-click on the device in the topology pane, select
Additional Functions
>
Communication
and Figure 8 appears. Correct the
Polling Address
and click
Apply
.
Disconnect and then reconnect.
Figure 8 Communication Tab
14. Click
Upload All Parameters
icon (see red box in Figure 7).
GE recommends registering your software.
GE recommends registering your software immediately. You are
required to register after a 30 day trial period. After the trial period
you won’t be able to use the software until you complete the
registration process that the software guides you through.
Upload means to pull data from the SVi1000 and load data into
DTM on the PC. Download puts data from the DTM into the
SVi1000.
NOTE
NOTE
